Tools4cheap
HomeAbout UsProducts
  
Order status View Order Status Checkout Checkout Email Email store
Search our store   
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu

 

Tools4cheap
196 Mass Ave
Harvard, MA 01451
 

Email Us


Home » Lathe Tooling » Lathe Chucks ,Back Plates and Face Plates

 Checkout
Lathe Back Plate - 1-1/2"-8 Threaded

Heavy duty 1-1/2"-8 threaded backplate. Ready to machine to fit your chuck. You will need to face it on your lathe, machine a spigot/plug to fit tightly into your chuck and drill/tap the holes to match your specific chuck. OD is aprox 6.5". Plate is aprox 13/16" thick and hub is aprox 3/4" thick.
Fits many South Bend 9" and 10K lathes, many Atlas and Logan lathes and others.

Price: $47.00
Lathe Back Plate - 1-3/4"-8 Threaded

Heavy duty 1-3/4"-8 threaded backplate. Ready to machine to fit your chuck. You will need to face it on your lathe, machine a spigot/plug to fit tightly into your chuck and drill/tap the holes to match your specific chuck. On some machines you may need to take a few thousandths off the unthreaded register area. OD is aprox 6.5".

Very hard to find.

Price: $47.00


Lathe Back Plate - 1-7/8"-8 Threaded

Heavy duty 1-7/8"-8 threaded backplate. Ready to machine to fit your chuck. You will need to face it on your lathe, machine a spigot/plug to fit tightly into your chuck and drill/tap the holes to match your specific chuck. On some machines you may need to take a few thousandths off the unthreaded register area. OD is aprox 6.5".
Fits many older smaller 1" spindle South Bend Heavy 10" lathes (10R) and 13" lathes.
Very hard to find.

Price: $47.00
Lathe Back Plate - 2-1/4"-6 Threaded

Heavy duty 2-1/4"-6 threaded backplate. Ready to machine to fit your chuck. You will need to face it on your lathe, machine a spigot/plug to fit tightly into your chuck and drill/tap the holes to match your specific chuck. On some machines you may need to take a few thousandths off the unthreaded register area. OD is aprox 6.5".
Fits many older small spindle South Bend 14-1/2" lathes.
Very hard to find.

Price: $47.00


Lathe Back Plate - 2-3/8"-6 threaded

Heavy duty 2-3/8"-6 threaded backplate. Ready to machine to fit your chuck. You will need to face it on your lathe, machine a spigot/plug to fit tightly into your chuck and drill/tap the holes to match your specific chuck. OD is aprox 8". Plate is aprox 1" thick and hub is aprox 7/8" thick.
Fits many South Bend 16" and 14.5" lathes as well as others.

Price: $60.00
Lathe Back Plate 6" Dia - 2-1/4"-8 Threaded

Heavy duty 2-1/4"-8 threaded backplate. Ready to machine to fit your chuck. You will need to face it on your lathe, machine a spigot/plug to fit tightly into your chuck and drill/tap the holes to match your specific chuck. OD is aprox 6.5". Plate is aprox 3/4" thick and hub is aprox 1" thick.
Fits many South Bend Heavy 10 and 13" lathes as well as others.

Price: $46.00


Lathe Back Plate 8" Dia- 2-1/4"-8 Threaded

Heavy duty 2-1/4"-8 threaded backplate. 8-1/8" Diameter.
Ready to machine to fit your chuck. You will need to face it on your lathe, machine a spigot/plug to fit tightly into your chuck and drill/tap the holes to match your specific chuck.
Fits many South Bend Heavy 10 and 13" lathes as well as others.

Price: $60.00
Lathe Back Plate 8" Diameter  1-3/4"-8 Threaded

Heavy duty 1-3/4"-8 threaded backplate. Ready to machine to fit your chuck. You will need to face it on your lathe, machine a spigot/plug to fit tightly into your chuck and drill/tap the holes to match your specific chuck. On some machines you may need to take a few thousandths off the unthreaded register area. OD is aprox 8".
Very hard to find.

Price: $60.00


Lathe Back Plate 8" Diameter  1-7/8"-8 Threaded

Heavy duty 1-7/8"-8 threaded backplate. Ready to machine to fit your chuck. You will need to face it on your lathe, machine a spigot/plug to fit tightly into your chuck and drill/tap the holes to match your specific chuck. On some machines you may need to take a few thousandths off the unthreaded register area. OD is aprox 8".
Fits many older smaller 1" spindle South Bend Heavy 10" lathes (10R) and 13" lathes.
Very hard to find.

Price: $60.00
Lathe Back Plate 8" diameter- L00

L00 backplate. Ready to machine to fit your chuck. You will need to face it on your lathe, machine a spigot/plug to fit tightly into your chuck and drill/tap the holes to match your specific chuck. OD is aprox 8"

Fits many Delta/Rockwell and Clausing lathes as well as others.

Price: $104.00


Lathe Chuck - 6" 3 Jaw 2pc Reversible Jaws + 1-1/2"-8 or 2-1/4"-8 Backplate

6" 3 jaw scroll chuck with 2-1/4"8 or 1-1/2"-8 threaded back plate. Comes with reversible jaws, backplate mounting bolts and chuck key. Notes: 1)On some lathes you may have to bore the backplate to clearance the register on your lathe spindle. This is true with any new threaded chuck. You want a custom/precise fit here as this helps determine accuracy much more so then the course threads of the chuck. I have seen this with some Logan machines. 2)Also You will need to machine the center "plug" on the backplate to fit the chucks back, mfg ships them aprox 1mm oversize so you can match them on your particular lathe. This makes the chuck more accurate.

Spindle Thread: 2-1/4" -8 (Shown)
1-1/2" -8
Price: $172.00
Lathe Chuck -D1-6 10" 3 Jaw

Camlock, 3 Jaw scroll chuck, 10" (250mm actual) chuck. D1-6 mount. Jaws are 2pc/reversable.

List Price: $253.00
Price: $200.00


Lathe Chuck 6" 4 Jaw W/ Threaded Backplate
6" 4 jaw chuck with choice of threaded back plate. Comes with backplate mounting bolts and chuck key. Jaws are reversable and adjust independently Notes: 1) On some lathes you may have to bore the backplate to clearence the register on your lathe spindle. This is true with any new threaded chuck. You want a custom/precise fit here as this helps determine acuracy much more so then the course threads of the chuck. I have seen this with some Logan machines. 2)Also You will need to machine the center "plug" on the backplate to fit the chucks back, mfg ships them aprox 1mm oversize so you can match them on your particular lathe. This makes the chuck more accurate. 3) The 1-1/2"-8 version has the bolt holes coming in from the back of the chuck, the 2-1/4"-8 has them from the front as in the photo.
Spindle Thread: 2-1/4" -8 (Shown)
1-1/2" -8
Price: $140.00
Lathe Chuck D1-3 6" 4 Jaw

6" D1-3 camlock mount 4 Jaw chuck. Independent jaws, d1-3 backplate and pins

List Price: $181.00
Price: $125.00


Lathe Chuck D1-4 6" 3 Jaw Scroll

Camlock, 3 Jaw, 6" Scroll chuck. Jaws are 2 pc/reversable. This is a direct mount chuck, the pins go right into the chuck back

List Price: $160.00
Price: $120.00
Lathe Face Plate w/ Tapped holes
Brand new in the box. Custom made face plate with 5/16"-18 tapped holes and 7/16" wide slots. Available in 2-1/4"-8 mount or 1-1/2"-8 mount (pictured). 8.5" diameter
Depending on your lathe, you may have to enlarge or cutdown the register area to match for optimal thread engagement.
A Tools4cheap exclusive!
Face Plate Thread: 1-1/2"-8
2-1/4"-8
Price: $100.00


Lathe Face Plate w/ Tapped holes L00

Brand new in the box. Custom made face plate with 5/16"-18 tapped holes and 7/16" wide slots. L00 mount. 8.5" diameter. Cast iron. A Tools4cheap exclusive!

Price: $100.00
 

Shopping cart
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

News
Welcome to the www.tools4cheap.net website! We specialize in hard to find new/used tooling and accessories to fit South Bend , Logan , Atlas Lathes. As well as more common R8 tooling for Bridgeport mills and other machines. We also stock hard to find 5V, 3C, 3AT, Morse Taper 2  and Brown & Sharpe collets. Any questions, please send an email and ask.
Copyright 2006-2014
Tools4cheap LLC
by Tools4cheap.net
Thanks for shopping Tools4cheap for the best prices on tooling for your machine shop! Tools4cheap is not affiliated with or endorsed by South Bend Lathe Co. ™ , Logan Actuator Co. ™, Rockwell Tools ™ or Atlas / Clausing Industrial Inc. ™ All images, descriptions, and text on this web site representing these products are the sole property of Tools4cheap LLC. Copy or use of the images and descriptions from this web site without prior written permission from Tools4cheap LLC is strictly prohibited. Copyright 2010 by Tools4cheap LLC. All rights reserved.
Credit cards home | about us | products | policies | search | view cart | contact us | site map