Tools4cheap
HomeAbout UsProducts
  
Order status View Order Status Checkout Checkout Email Email store
Search our store   
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu
menu

 

Tools4cheap
196 Mass Ave
Harvard, MA 01451
 

Email Us


Home » Lathe Tooling » Aloris Products - Made in USA » Aloris BXA Size

 Checkout
Aloris BXA No-22 Universal Turning and Boring Holder
A unique design for models 22 provides for many angular turning, contouring and chamfering operations. The cartridge has 12 indexing positions at 15° intervals. The model #22 with its two dovetail design leads to a wide range of applications by permitting front and rear turning, contouring, boring and facing operations. All holders assure proper cutting edge and clearance angles at all indexing points.
BXA Size
Price: $270.00
Aloris BXA Quick Change Starter Wedge Tool Post Set with 4 Holders
Sets Include: • 1 Tool post and 4 holders • No. 1 turning and facing holder • No. 2 boring, turning and facing holder • No. 4D heavy-duty boring bar holder • No. 7 universal parting blade holder
Bottom T-nut can be custom machined at no additional Charge
Any blades/tools shown in photos are not included BXA Size
Price: $759.00


Aloris BXA Super Precision Tool Posts
Precision engineered to assure repetitive accuracy. Advanced design provides built in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances. Quickly and easily installed on any engine lathe, bench or turret lathe, for a wide range of operations — from fine precision work to heavy duty cutting.
Features: • Guaranteed lasting repetitive accuracy to within millionths • Only a second to change tools • Rugged — no chatter or vibration • No time wasted with shims • Unlimited versatility • Safe and simple to operate
BXA size
Price: $434.00
Aloris BXA Wedge Quick Change Tool Post with 10 Holders Set
Include:Wedge post and the following holders: BXA-1 BXA-2 BXA-4D BXA-53 BXA-6 BXA-7 BXA-8 BXA-10 BXA-16 BXA-20 T-Nut can be custom machined at no additional cost
Any blades/tools shown in photos are not included BXA Size
Price: $1575.00


Aloris BXA Wedge Quick Change Tool Post with 6 Holders Set
Include:
• 1 Tool post and 6 holders • No. 1 turning and facing holder • No. 2 boring, turning and facing holder • No. 4D heavy-duty boring bar holder • No. 6 multiple tool holder • No. 7 universal parting blade holder • No. 8 threading holder
T-Nut can be custom machined at no additional cost. Any blades/tools shown in photos are not included
BXA Size
Price: $994.00
Aloris BXA-1 Turning and Facing Holder
TURNING AND FACING HOLDER Takes various sizes of bits. Turning and facing tools can be locked in together. Saves time and labor when changing operations
BXA Size
Price: $68.00


Aloris BXA-10 Knurling Facing Turning Holder
KNURLING, FACING AND TURNING HOLDER For turning and facing as well as knurling. Supplied with a set of high speed precision ground and lapped medium diamond knurls. Easily replaceable. Holder supplied with 2 knurls.
BXA Size
Price: $149.00
Aloris BXA-100 Boring Bar Holder
BORING BAR HOLDER Heavy duty boring bar holder with precision ground bore and set screw clamping to provide maximum rigidity and alignment of boring bars. Capacities listed in chart. Bushings sold separately. 3/4" hole
BXA Size
Price: $109.00


Aloris BXA-104 Boring Bar Holder
BORING BAR HOLDER Heavy duty boring bar holder with precision ground bore and set screw clamping to provide maximum rigidity and alignment of boring bars. Capacities listed in chart. Bushings sold separately. 1" hole
BXA Size
Price: $115.00
Aloris BXA-12 Turning Holder Positive Rake
ALORIS #12 TURNING HOLDER FOR CARBIDE TRIANGULAR INSERTS Accommodates standard triangular carbide insert (not included) positive rake. Furnished with fully adjustable carbide chipbreaker and carbide shim to protect the holder.
BXA Size
Price: $153.00


Aloris BXA-12N Turning Holder Negative Rake
ALORIS 12N TURNING HOLDER FOR CARBIDE TRIANGULAR INSERTS Accommodates standard triangular carbide insert (not included) negative rake. Furnished with fully adjustable carbide chipbreaker and carbide shim to protect the holder..
BXA Size
Price: $153.00
Aloris BXA-13 Extension Tool Holder
EXTENSION TOOL HOLDER #13
A new addition to the versatile Aloris dovetail mounted quick-change tool holder series. The #13 provides an extremely rugged extended open slot featuring maximum rigidity for deep turning or facing operation..
BXA Size
Price: $112.00


Aloris BXA-13L Extension Tool Holder
EXTENSION TOOL HOLDER #13L A new addition to the versatile Aloris dovetail mounted quick-change tool holder series. The #13L provides an extremely rugged extended open slot featuring maximum rigidity for deep turning or facing operation. 13L – opposite hand
BXA Size
Price: $118.00
Aloris BXA-141  Boring Bar Holder
BORING BAR HOLDER Heavy duty boring bar holder with precision ground bore and set screw clamping to provide maximum rigidity and alignment of boring bars. Capacities listed in chart. Bushings sold separately. 1-1/4" hole
BXA Size
Price: $131.00


Aloris BXA-15 LH Profiling Tool Holder
PROFILING TOOL HOLDERS Available with right or left hand design for front or rear turning, profiling and contouring operations. Design features include: Unique, positive locking of insert is accomplished by the two-way force exerted by locking pin and the locking screw. Insert is held down and tight against the shoulders. Clamp lock insures extra rigidity of insert and holds chip-breaker, when used, securely in place. Choice of various diamond shaped inserts provides adaptation to positive or negative rake profiling. Model #15L (left hand) dovetail mounting design assures maximum repeating accuracy when used with standard Aloris Tool Post. Holder supplied with shim and clamp.
BXA Size
Price: $299.00
Aloris BXA-15 RH Profiling Tool Holder
PROFILING TOOL HOLDERS Available with right or left hand design for front or rear turning, profiling and contouring operations. Design features include: Unique, positive locking of insert is accomplished by the two-way force exerted by locking pin and the locking screw. Insert is held down and tight against the shoulders. Clamp lock insures extra rigidity of insert and holds chip-breaker, when used, securely in place. Choice of various diamond shaped inserts provides adaptation to positive or negative rake profiling. Model #15 (right hand) dovetail mounting design assures maximum repeating accuracy when used with standard Aloris Tool Post. Holder supplied with shim and clamp.
BXA Size
Price: $299.00


Aloris BXA-16 Turning Facing Holder for Triangular Inserts
COMBINATION TURNING AND FACING HOLDER FOR CARBIDE TRIANGULAR INSERTS Accommodates standard triangular positive rake carbide inserts. (not included) Unique design permits both right hand and left hand turning and facing. Supplied with fully adjustable carbide chipbreakers and carbide shims to protect the holder..
BXA Size
Price: $214.00
Aloris BXA-16N Turning Facing Holder for Triangular Inserts - Neg Rake
COMBINATION TURNING AND FACING HOLDER FOR CARBIDE TRIANGULAR INSERTS Accommodates standard triangular negative rake carbide inserts. (not included) Unique design permits both right hand and left hand turning and facing. Supplied with fully adjustable carbide chipbreakers and carbide shims to protect the holder...
BXA Size
Price: $220.00


Aloris BXA-19 Adjustable Knurling Holder
ALORIS ADJUSTABLE KNURLING HOLDER …excellent knurling, with approach adjustability, is provided with the newly designed #19 knurling holder. The #19 is selfcentering and is adjusted by means of a socket head screw (no longer has the knob as shown), providing the ideal near-vertical-axis approach angle for a wide range of stock diameters. Spindle and crossslide pressure are minimal, thus knurling of thin wall tubing is easily performed. The Aloris #19, which is designed for use in any standard turret tool post or other open-slot holder, is also availalbe with dovetail mounting (series 19) to fit Aloris tool posts. Precision ground, 3/4" O.D. x 3/8" wide, high-speed medium diamond knurls are supplied unless otherwise specified.
BXA Size
Price: $347.00
Aloris BXA-1S Oversize Turning and Facing Holder
OVERSIZE TURNING AND FACING HOLDER Takes large sizes of bits. Turning and facing tools can be locked in together. Saves time and labor when changing operations. B dimension is oversize which allows larger tools to be used.
BXA Size
Price: $97.00


Aloris BXA-2 Boring, Turning and Facing Holder
BORING, TURNING AND FACING HOLDER “V” groove holds round shank boring bars and tools as well as square tool bits. Boring bar not included.
BXA Size
Price: $75.00
Aloris BXA-20 Universal Tool Holder
A unique design for model #20 holder provides for many angular turning, contouring and chamfering operations. The cartridge has 12 indexing positions at 15° intervals. (insert not included). All holders assure proper cutting edge and clearance angles at all indexing points.
BXA Size
Price: $211.00


Aloris BXA-2s Oversize Boring  Turning and Facing Holder
OVERSIZE BORING, TURNING AND FACING HOLDER “V” groove holds round shank boring bars and tools as well as square tool bits. B dimension is oversize which allows larger tools to be used. Boring bar not included.
BXA Size
Price: $103.00
Aloris BXA-35 Dovetail Chuck Holder
ALORIS DOVETAIL CHUCK HOLDER The uniquely designed dovetail chuck holder permits quick and accurate mounting of drills, reamers, taps, boring bars, etc., and feed by means of your lathe’s carriage power drive–it eliminates tailstock mounting and tailstock drive. The Aloris chuck holder offers all of the quick-change, repeat positioning accuracy and high-rigidity features found in all Aloris precision dovetail holders. The chuck is mounted in a recessed position for minimum overhang, permitting use of the entire usable length of the tool. 0-1/2" capacity. Dovetail holder supplied complete with chuck and key.
BXA Size
Price: $260.00


Aloris BXA-4 Heavy Duty Boring Bar Holder
HEAVY DUTY BORING BAR HOLDER Equipped with a split bushing to accommodate a boring bar of smaller diameter. It grips bar with extreme rigidity, cuts smoothly without chatter. 3/4"/1" hole
BXA Size
Price: $136.00
Aloris BXA-41 Heavy Duty Boring Bar Holder
HEAVY DUTY BORING BAR HOLDER Equipped with a split bushing to accommodate a boring bar of smaller diameter. It grips bar with extreme rigidity, cuts smoothly without chatter. 1" / 1-1/4" hole
BXA Size
Price: $154.00


Aloris BXA-41D Boring Bar Holder
BORING BAR HOLDER Precision ground bore and split clamping design to accommodate excellent clamping pressure and the ability to adjust positive to negative cutting angle on boring bar. 1-1/4" Bore hole
BXA Size
Price: $122.00
Aloris BXA-4D Boring Bar Holder
BORING BAR HOLDER Precision ground bore and split clamping design to accommodate excellent clamping pressure and the ability to adjust positive to negative cutting angle on boring bar. 1" Bore hole
BXA Size
Price: $107.00


Aloris BXA-5 Morse Taper 2 Holder
MORSE TAPER 2 HOLDER Drills with carriage by using power feed instead of tail stock. Easily centered.
BXA Size
Price: $99.00
Aloris BXA-53 Morse Taper 3 Holder
MORSE TAPER 3 HOLDER Drills with carriage by using power feed instead of tail stock. Easily centered.
BXA Size
Price: $130.00


Aloris BXA-5C Collet Holder
5C COLLET HOLDER Can be used with a variety of shank tools: drills, reamers, C. bores, taps, end mills, boring bars and other tools. Collet not included
BXA Size
Price: $170.00
Aloris BXA-6 Multiple Tool Holder
MULTIPLE TOOL HOLDER Versatile, ideal for repetitive work: for gang set-ups or form tool.
BXA Size
Price: $116.00


Aloris BXA-7 Universal Parting Holder
UNIVERSAL PARTING BLADE HOLDER #7 Holders are only for use with T-type blades shown below; or with bevel (wedge-shape) blades having parallel top and bottom edges, as shown below. For bevel (see drawing) as well as T-type blades. Enables you to cut-off close to chuck. Absence of vibration prevents breaking blades. Blade not included
BXA Size
Price: $115.00
Aloris BXA-71 Cut Off and Grooving Holder
CUT-OFF AND GROOVING HOLDER Designed for extremely high rigidity under heavy duty conditions, and cool chatterfree operation at higher speeds. Two different blades (NOT INCLUDED) can be used with this holder: self-locking throwaway insert blade, or reversible blade with brazed-in carbide tips. The chip-breaker is an integral part of the blade and cannot be lifted by broken chips. Simplicity is but one of the major advantages of the Series 71. Adjustment of the blade position is simple, the locking is accomplished by one screw instead of the usual number of adjusting and clamping screws. The versatility of this tool is further increased by the availability of a wide range of cutting edge widths. Holder supplied less blade.
BXA Size
Price: $210.00


Aloris BXA-77 Cut Off and Grooving Holder
CUT-OFF AND GROOVING HOLDER Designed for extremely high rigidity under heavy duty conditions, and cool chatter-free operation at higher speeds. Two different blades can be used with this holder: self-locking throwaway insert blade, or reversible blade with brazed-in carbide tips, shown. The chip breaker is an integral part of the blade and cannot be lifted by broken chips. Simplicity is but one of the major advantages of the Series 77. Adjustment of the blade position is simple, the locking is accomplished by one screw instead of the usual number of adjusting and clamping screws. The versatility of this tool is further increased by the availability of a wide range of cutting edge widths. Holder supplied less blade. Blades are interchangeable with Iscar and Sandvik. BXA Size
Price: $200.00
Aloris BXA-7R Reversible Universal Parting Holder
UNIVERSAL PARTING BLADE TOOL HOLDER – REVERSIBLE Has the same features as #7 with the advantage of rear cut-off use. Blade not included.
BXA Size
Price: $137.00


Aloris BXA-8 Threading Tool Holder
THREADING HOLDER #8 This universal threading holder comes with an interchangeable high speed threading blade which has two cutting edges. You may now reverse your spindle and cut a thread without fear of hitting shoulders. Speeds your threading. Also available with carbide insert blade. Holders supplied with blade as follows: BXA-P6,
BXA Size
Price: $131.00
Aloris BXA-80 Diamond Carbide Insert Turning Facing Holder
80° DIAMOND TURNING AND FACING TOOL Aloris Series D80 dovetail holders accommodate all varieties of standard 80° diamond shaped carbide inserts — positive, negative or neutral rake and either left or right lead angle. Inserts are not supplied. They are designed for use with Aloris quick change tool posts and allow turning and facing operations without removing the holder from the tool post. Repeat positioning accuracy within millionths is assured when used with Aloris tool posts.
BXA Size
Price: $190.00


Aloris BXA-80L Left Diamond Carbide Insert Turning Facing Holder
80° DIAMOND TURNING AND FACING TOOL Aloris Series D80L Left dovetail holders accommodate all varieties of standard 80° diamond shaped carbide inserts — positive, negative or neutral rake and either left or right lead angle. Inserts are not supplied. They are designed for use with Aloris quick change tool posts and allow turning and facing operations without removing the holder from the tool post. Repeat positioning accuracy within millionths is assured when used with Aloris tool posts.
BXA Size
Price: $190.00
Aloris BXA-81 Threading and Grooving Tool Holder
THREADING AND GROOVING TOOL HOLDER #81 Holder provides accurate threading and grooving. It is equipped with a threading insert holder (Aloris AT86) at the front – and an open slot for a grooving tool at the rear. Cutting tools are not included. Also available with highspeed blade. Holder supplied with AT86 insert holder less threading insert. Also available with high-speed blade.
BXA Size
Price: $226.00


Aloris BXA-88 Threading and Grooving Tool Holder
ADJUSTABLE THREADING HOLDERS WITH H.S. BLADE & AT88 HEAD The new Aloris Series 88 Adjustable Threading Holder for right and left-hand threading is designed for use with the new Aloris AT1H, AT1V or AT2V dual insert threading holders with two carbide cutting tips. In addition, the #88 Series holder will accommodate standard Aloris AT86 threading insert holders as well as standard high speed steel (HSS) Aloris P Series or AC Series. The key characteristics of the Series 88 holder is its adjustability feature which allows easy setting of the thread helix angle 10° to the left or right by means of two set screws, a direct-reading scale and a builtin locking feature.
BXA Size
Price: $311.00
 

Shopping cart
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

News
Welcome to the www.tools4cheap.net website! We specialize in hard to find new/used tooling and accessories to fit South Bend , Logan , Atlas Lathes. As well as more common R8 tooling for Bridgeport mills and other machines. We also stock hard to find 5V, 3C, 3AT, Morse Taper 2  and Brown & Sharpe collets. Any questions, please send an email and ask.
© Copyright 2006-2014
Tools4cheap LLC
by Tools4cheap.net
Thanks for shopping Tools4cheap for the best prices on tooling for your machine shop! Tools4cheap is not affiliated with or endorsed by South Bend Lathe Co. ™ , Logan Actuator Co. ™, Rockwell Tools ™ or Atlas / Clausing Industrial Inc. ™ All images, descriptions, and text on this web site representing these products are the sole property of Tools4cheap LLC. Copy or use of the images and descriptions from this web site without prior written permission from Tools4cheap LLC is strictly prohibited. © Copyright 2010 by Tools4cheap LLC. All rights reserved.
Credit cards home | about us | products | policies | search | view cart | contact us | site map