Tools4cheap LLC Online Machine Shop Tooling Store:

Home » All Products

3C Collet Closer Set to fit South Bend 9" 10K, Logan, Atlas Lathe

Tools4cheap 3C collet closer set to fit South Bend 9" workshop Lathe model A, B or C, South Bend 10K Lathe. Logan 9" 10" Lathes, Atlas 10" and 12" lathes and many more makes/models
All metal construction, no plastic parts!
Includes:
Oversize 18" Handwheel Draw bar threaded for 3C collets.
Thrust Bearing.
1-1/2"-8 Threaded spindle nose protector (this also is used to remove the nose pc) Sorry no spanner wrench is included with this set
Hardened Morse taper 3 nose pc adapter for 3C collets. Has locating pin inside
This closer was designed with an oversize bar to work on practically any lathe with morse taper 3 spindle. The handle is secured to the bar with 4 setscrews. The idea is that once you are happy with the length you have adjusted it to, then you will trim the back end of the bar off. You can optionally drill small divots in the bar for the setscrews but this isnt needed. I would use some lock-tight on them though.

Price: $140.00

Aloris AXA-15 LH Profiling Tool Holder

PROFILING TOOL HOLDERS Available with right or left hand design for front or rear turning, profiling and contouring operations. Design features include: Unique, positive locking of insert is accomplished by the two-way force exerted by locking pin and the locking screw. Insert is held down and tight against the shoulders. Clamp lock insures extra rigidity of insert and holds chip-breaker, when used, securely in place. Choice of various diamond shaped inserts provides adaptation to positive or negative rake profiling. Model #15L (left hand) dovetail mounting design assures maximum repeating accuracy when used with standard Aloris Tool Post. Holder supplied with shim and clamp.
AXA Size

Price: $251.00

Aloris AXA-15 RH Profiling Tool Holder

PROFILING TOOL HOLDERS Available with right or left hand design for front or rear turning, profiling and contouring operations. Design features include: Unique, positive locking of insert is accomplished by the two-way force exerted by locking pin and the locking screw. Insert is held down and tight against the shoulders. Clamp lock insures extra rigidity of insert and holds chip-breaker, when used, securely in place. Choice of various diamond shaped inserts provides adaptation to positive or negative rake profiling. Model #15 (right hand) dovetail mounting design assures maximum repeating accuracy when used with standard Aloris Tool Post. Holder supplied with shim and clamp.
AXA Size

Price: $251.00

Aloris AXA-19 Adjustable Knurling Holder

ALORIS ADJUSTABLE KNURLING HOLDER …excellent knurling, with approach adjustability, is provided with the newly designed #19 knurling holder. The #19 is selfcentering and is adjusted by means of a socket head screw (no longer has the knob as shown), providing the ideal near-vertical-axis approach angle for a wide range of stock diameters. Spindle and crossslide pressure are minimal, thus knurling of thin wall tubing is easily performed. The Aloris #19, which is designed for use in any standard turret tool post or other open-slot holder, is also availalbe with dovetail mounting (series 19) to fit Aloris tool posts. Precision ground, 3/4" O.D. x 3/8" wide, high-speed medium diamond knurls are supplied unless otherwise specified.
AXA Size

Price: $302.00

Aloris AXA-71 Cut Off and Grooving Holder

CUT-OFF AND GROOVING HOLDER Designed for extremely high rigidity under heavy duty conditions, and cool chatterfree operation at higher speeds. Two different blades (NOT INCLUDED) can be used with this holder: self-locking throwaway insert blade, or reversible blade with brazed-in carbide tips. The chip-breaker is an integral part of the blade and cannot be lifted by broken chips. Simplicity is but one of the major advantages of the Series 71. Adjustment of the blade position is simple, the locking is accomplished by one screw instead of the usual number of adjusting and clamping screws. The versatility of this tool is further increased by the availability of a wide range of cutting edge widths. Holder supplied less blade.
AXA Size

Price: $188.00

Aloris AXA-77 Cut Off and Grooving Holder

CUT-OFF AND GROOVING HOLDER Designed for extremely high rigidity under heavy duty conditions, and cool chatter-free operation at higher speeds. Two different blades can be used with this holder: self-locking throwaway insert blade, or reversible blade with brazed-in carbide tips, shown. The chip breaker is an integral part of the blade and cannot be lifted by broken chips. Simplicity is but one of the major advantages of the Series 77. Adjustment of the blade position is simple, the locking is accomplished by one screw instead of the usual number of adjusting and clamping screws. The versatility of this tool is further increased by the availability of a wide range of cutting edge widths. Holder supplied less blade. Blades are interchangeable with Iscar and Sandvik. AXA Size

Price: $169.00

Aloris AXA-88 Threading and Grooving Tool Holder

ADJUSTABLE THREADING HOLDERS WITH H.S. BLADE & AT88 HEAD The new Aloris Series 88 Adjustable Threading Holder for right and left-hand threading is designed for use with the new Aloris AT1H, AT1V or AT2V dual insert threading holders with two carbide cutting tips. In addition, the #88 Series holder will accommodate standard Aloris AT86 threading insert holders as well as standard high speed steel (HSS) Aloris P Series or AC Series. The key characteristics of the Series 88 holder is its adjustability feature which allows easy setting of the thread helix angle 10° to the left or right by means of two set screws, a direct-reading scale and a builtin locking feature.
AXA Size

Price: $251.00

« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | Next »